MolecuLight i:X Manual Del Usuario página 15

Figure 13: Creating a New Album
9.5.2 Accessing and Using Previously Created Albums
To add new images to a previously created Album, enable the Album icon
1. Select the desired Album from the Settings Menu
The selected Album will be highlighted grey.
2. The selected Album becomes the Active Album and is labelled as the 'Active Album' across the Menu Bar:
Newly acquired images and videos will be saved to the Active Album.
When browsing the Image Library with an Active Album designated, only images and videos saved to the selected
Active Album are displayed in the Image Library. All acquired images and videos can always be found on the Camera Roll.
Note Images and videos captured in a designated Active album cannot be moved into another Album.
At any time, the user may go back to the Settings icon to disable the Album feature. When disabled, all
Note
acquired images and videos can be browsed from the Image Library
When the total number of created Albums reaches 9999, a new Album "iX-0001" shall be created even if
Note
an old Album with the same name exists. This does not overwrite the previous Album.
TM
MolecuLight i:X User Manual Revision 1.0
from the Settings Menu :
drop down list (as depicted above).
Figure 14: Menu Bar
.
Page 27 of 43
9.5.3 Capture Image and Video Capture Screens
9.5.3.1 Capture Screens when the Active Album is the Camera Roll
When the Album feature is enabled with the Camera Roll as the Active Album, the Capture Image
screens display the Active Album "Camera Roll" across the top of the image, and the date and time of acquisition
across the bottom left side of the image as depicted in Figure 15.
9.5.3.2 Capture Screens when the Active Album is Created
When created Albums are used as the Active Album instead of the Camera Roll, a unique Image ID correlating to the Album
name followed by "photo number" appears on the bottom left side of the image in addition to the date and time of
acquisition.
As depicted in Figure 16, this Image ID will appear at the bottom of the saved image and will automatically increment each
time a new image/video is taken. Although the Image ID and date and time of acquisition is displayed during Video Capture,
videos are not saved with an Image ID or date and time of acquisition.
9.5.4 Deleting Albums
With the Album feature enabled from the Settings Menu
1. Delete an Album by selecting the 'Edit' function within the Settings Menu
2. If user selects the 'Edit' button, a minus sign appears next to each Album:
To exit the 'Edit' function, tap the 'Edit' button again.
3. When the minus sign is selected, a 'Delete' button will appear:
4. If 'Delete' button is selected a confirmation message appears.
5. Once user confirms to delete the Album, they will be asked whether or not to also delete
the images within that Album.
If user chooses not to delete the images after the Album is deleted, the images will be
found in the Camera Roll.
TM
MolecuLight i:X User Manual Revision 1.0
and Video Capture
Figure 15: Capture Screens with
Camera Roll as Active Album
Figure 16: Capture Screens with
Created Album as Active Album
:
.
Figure 17: Deleting Albums
Page 28 of 43