Drawing Up The Bobbin Thread; Fabric, Thread And Needle Table - Texi Fox 25 Manual De Usuario

Drawing up bobbin thread
EN
Raise the presser foot and hold the needle thread lightly
with you left hand.
Turn the hand wheel slowly towards you with your right

DRAWING UP THE BOBBIN THREAD

hand until the needle goes down and continue turning the
hand wheel until the take-up lever is at its highest
1. Raise the presser foot.
n thread
position.
2.
Holding needle thread loosely with your left hand, turn hand wheel toward you
Lightly draw up the needle thread forming a loop of the
t and hold the needle thread lightly with your right hand first lowering the needle and continuing until the needle
bobbin thread.
comes to its highest position. Pull upper thread lightly. Bobbin thread will come up
in a loop.
lowly towards you with your right
Pull 15cm (6 inches) of both thread back and under the
WING MACHINE
3.
Pull both upper and bobbin threads about 10 cm toward the back and under the
goes down and continue turning the
presser foot.
ake-up lever is at its highest presser foot.
edle thread forming a loop of the
lightly
of both thread back and under the
right
ing the
Balancing top thread tension
f the

FABRIC, THREAD AND NEEDLE TABLE

r the
Select size of thread and needle according to the fabric to be sewn.
d tension
③
Type of fabric
Light weight
The top thread and the bobbin thread
should interlock in the center of two layers Medium weight
of fabric in straight seams.
Tighten the needle thread tension by
Set the desired number of the thread
moving the dial to a higher number.
tension dial at setting mark.
Heavy weight
NOTE: In order to obtain better zigzag stitches, the top thread tension should be Stretch, double knit, tricot,
spandex, jersey
slightly weaker than the bobbin thread tension. That means, the top thread
dle thread tension by
should appear slightly on the reverse side of the fabric, but the bobbin thread
o a higher number.
cannot appear on the top side of the fabric.
Remember to always use the correct needles for specific types of material.
Loosen the needle thread tension by
in better zigzag stitches, the top thread tension should be
moving the dial to a lower number.
than the bobbin thread tension. That means, the top thread
slightly on the reverse side of the fabric, but the bobbin thread
72
on the top side of the fabric.
he top thread tension should be
③
②
The top thread and the bobbin thread
should interlock in the center of two layers
of fabric in straight seams.
Set the desired number of the thread
tension dial at setting mark.
Loosen the needle thread tension by
moving the dial to a lower number.
Texi Fox 25
②
The top thread and the bobbin thread
should interlock in the center of two layers
of fabric in straight seams.
Set the desired number of the thread
tension dial at setting mark.
Thread thickness
Ctn. #120 - 150
Silk #120 - 150
Syn. #120 - 150
Ctn. #100 - 120
Silk #100 – 120
Syn. #100 - 120
Loosen the needle thread tension by
moving the dial to a lower number.
Ctn. #50 - 80
Silk #50 - 80
Syn. #50 - 80
Ctn. #120 - 150
Silk #120 - 150
②
③
Needle thickness
70 – 80
80 – 90
90 – 100
80 – 90
9