Reverse Stitching; Sewing Without Feed Dog; Marks On The Needle Plate - Texi Fox 25 Manual De Usuario

There are three positions for your presser foot.
1. Lower the presser foot to sew.
Presser foot lifter
2. Raise the lifter to the middle position to insert or remove
fabric.
There are three positions for your presser foot.
3. Lift it to its highest position to change the presser foot or to
1. Lower the presser foot to sew.

REVERSE STITCHING

remove thick fabric.
2. Raise the lifter to the middle position to insert or remove
fabric.
Reverse stitching is used for reinforcing 3. Lift it to its highest position to change the presser foot or to
remove thick fabric.
the ends of the seams. Press reverse
Reverse sewing lever
stitch button and sew 4-5 stitches.
(Using foot control, press pedal with
As long as you are pressing down this
Reverse sewing lever
pressing reverse stitch button).
button while sewing, the machine will feed
the fabric backwards.
As long as you are pressing down this
button while sewing, the machine will feed
the fabric backwards.

SEWING WITHOUT FEED DOG

Dropping the feed dogs
1. Open hook cover.
Dropping the feed dogs
2.
To switch of feed dog, press
1. For dropping the feed dogs, press down
lever and move it to the direction of arrow
down the lever and move it to the
as illustrated.
1. For dropping the feed dogs, press down direction of arrow as illustrated.
2. To raise the feed dogs, press down the
lever and move it to the direction of arrow
3. To raise the feed dogs, press
lever and move it to the direction or arrow as illustrated.
down the lever and move it to the
2. To raise the feed dogs, press down the
as illustrated.
direction or arrow as illustrated.
lever and move it to the direction or arrow
* Feed dogs must always be up for normal
For ordinary sewing, move the lever to
as illustrated.
sewing.
the left. This raises feed dogs to their
* Feed dogs must always be up for normal
highest position. For most sewing, the
sewing.
lever should be in this position. For
4
darning of free motion embroidery or
4
whenever fabric is to be moved by hand, move the lever to the right to lower the
fabric feed dogs.
* Feed dog must always be up for normal sewing.

MARKS ON THE NEEDLE PLATE

Seam guide line
Lines on the stitch plate help to guide
material evenly. The numbers on the needle
The numbers on the needle plate indicate
plate indicate the distance between the
the distance between the center needle
position and the indicating line.
center needle position and the indicating
The numbers in the front indicate in
line. The numbers in the front indicate in
Millimeters.
Millimeters. The numbers in the back indicate
The numbers in the back indicate in inches.
in inches.
Setting spool pins
The spool pins are used for holding the spool of thread in order
to feed thread to the machine.
To use, pull up the spool pin. Push down for storage.
KNOWING YOUR SEWING MACHINE KNOWING YOUR SEWING MACHINE
Texi Fox 25
2
EN
1
3
2
1
67