Tabla de contenido
BOITE POUR LES ACCESSOIRES
KNOWING YOUR SEWING MACHINE
Afin d'ouvrir la boîte des accessoires il
faut tirer vers soi le capot de la tablette
Accessories
(dessin à côté).
KNOWING YOUR SEWING MACHINE
1. Bobbins (3pcs)
2. Needle 3 pcs and twin needle 1 pc
3. Multi-function screwdriver
Accessories
4. Seam guide(optional)
5. Ripper/Brush
6. Buttonhole foot
1. Bobbins (3pcs)
7. Guide presser foot
2. Needle 3 pcs and twin needle 1 pc
8. Zipper foot
ACCESSOIRES
3. Multi-function screwdriver
9. Button fitting foot
4. Seam guide(optional)
5. Ripper/Brush
Les accessoires se trouvent dans la boîte
6. Buttonhole foot
retirable.
The foot that comes on your sewing machine
7. Guide presser foot
1.
3 bobines
is called zigzag foot and will be used for the
8. Zipper foot
2.
Assortiment d'aiguilles (3 + Double
9. Button fitting foot
majority of your sewing.
aiguille)
3.
Tournevis
4.
Découpeur des trous avec brosse
The foot that comes on your sewing machine
is called zigzag foot and will be used for the
5.
Pied boutonnière
Setting up your machine
majority of your sewing.
6.
Guidage
Bu sure to wipe off any surplus oil from needle
7.
Pied pour les fermetures
plate area before using your machine the first
8.
Pied la couture des boutons
time.
Setting up your machine
Power line cord/foot control
Bu sure to wipe off any surplus oil from needle
BRANCHEMENT DE LA MACHINE
Make sure that the sewing machine is turned off (the
plate area before using your machine the first
power switch is set to "O"), and then connect the plug
time.
Placez la machine sur un support stable.
of the power line and into the appliance inlet and your
1.
Connectez le câble d'alimentation à la
wall outlet.
Power line cord/foot control
machine en insérant la fiche à deux broches
Sewing speed can be varied the foot control.
Make sure that the sewing machine is turned off (the
dans la prise d'alimentation.
The harder you press on the control, the faster
power switch is set to "O"), and then connect the plug
2.
Connectez le câble d'alimentation à la prise
machine runs.
of the power line and into the appliance inlet and your
électrique.
wall outlet.
3.
Allumez la machine en appuyant sur
When foot control is disconnected,
NOTE:
l'interrupteur marche/arrêt.
the machine will not operate.
Sewing speed can be varied the foot control.
4.
Un signal lumineux LED s'allume.
The harder you press on the control, the faster
5.
Pour déconnecter la machine, appuyez sur
machine runs.
l'interrupteur marche/ arrêt, puis débranchez
la machine.
When foot control is disconnected,
Always disconnect the machine from power
NOTE:
the machine will not operate.
supply by removing the plug from the wall-outlet.
Power/light switch
Your machine will not operate until the power/light switch is turned on. The same switch controls
Always disconnect the machine from power
both the power and the light.
supply by removing the plug from the wall-outlet.
When servicing the machine, or changing needles, etc., machine must be disconnected from
the power supply.
1
1
4
1
6
6
Power/light
l'interrupteur d'alimentation
switch "OFF"
en position d'arrêt « 0 »
Texi Fox 25
Power/light
switch "OFF"
2
2
2
4
5
5
6
7
7
8
4
5
7
8
Power/light
l'interrupteur en position
switch "ON"
en marche « 1 »
Power/light
switch "ON"
FR
3
3
8
3
9
9
121
Capítulos
Tabla de contenido
