Tabla de contenido
НАЧАЛО И ЗАВЕРШЕНИЕ ШВА
ВНИМАНИЕ: Во время шитья следует обращать
внимание на пространство около иглы.
Машина автоматически продвигает материал, не
Raise the presser foot and position the fabric next to a
тяните и не подталкивайте материал.
stitching guide line on the needle plate.
Lower the needle into the fabric.
Lower the presser foot and smooth the thread towards the
1.
Установите иглу в наивысшей позиции.
back. Depress the foot control.
2.
Поднимите лапку и разместите под ней ткань.
Gently guide the fabric along the guide line letting the
3.
Опустите лапку.
fabric feed by itself.
4.
Отведите игольную и шпульную нити назад.
Сделайте несколько стежков.
5.
Отрегулируйте скорость шитья.
6.
Остановите машину, когда закончите шов.
For fastening the ends of seams, press the reverse stitch
7.
Поднимите прижимную лапку.
button and sew several reverse stitches.
Raise the presser foot and remove the fabric, drawing the
8.
С помощью махового колеса поднимите
KNOWING YOUR SEWING MACHINE
threads to back.
иглу вверх и от себя вытяните материал из-
под лапки. Обрежьте нитку при помощи
нитеобрезателя с боку машины.
Useful sewing tips
Various ways to achieve better sewing results are described below.
Refer to these tips when sewing.
The threads are cut the proper length for starting the next
1. Trial sewing
seam.
Use different stitch width and length for trial sewing. When you have finished, select the
best looking stitch width and length for correct sewing.
For the trial sewing, use a piece of fabric and thread that are the same as those used for
your project, and check the thread tension and stitch length and width. Since the results
differ depending on the type of stitching and the number of fabric layers sewn, perform the
trial sewing under the same conditions that will be used with your project.
СМЕНА НАПРАВЛЕНИЯ ШИТ
1.
2. Changing the sewing direction
Остановите машину за несколько
Stop the machine and turn the hand wheel
стежков перед сменой
toward you to bring the needle down into the
направления шитья.
fabric. Raise the presser foot.
2.
Установите иглу в нижней позиции
Pivot the fabric around the needle to change
(нажав кнопку позиции иглы либо
sewing direction as desired. Lower the
поворачивая маховик).
presser foot and continue sewing.
3.
Поднимите прижимную лапку.
4.
Поверните ткань вокруг иглы и
смените направление шитья.
5.
Опустите прижимную лапку и
3. Sewing curves
продолжайте шить.
1).Stop sewing, and then slightly change the sewing direction to sew around the curve.
2).When sewing along a curve while using a zigzag stitch, select a shorter length in order to
obtain a finer stitch.
4. Sewing thick fabrics
If the fabric does not fit under the presser foot
Raise the presser foot even higher to bring the presser foot to its highest position. Then feed
Texi Fox 25
RU
13
187
Capítulos
Tabla de contenido
