Machine Setting; Inserting Zippers And Piping; Button Sewing - Texi Fox 25 Manual De Usuario

front of foot.
n on fabric, put down the presser foot.
cation

INSERTING ZIPPERS AND PIPING

PRESSER FOOT - ZIPPER FOOT
hine Setting
1. Use zipper foot to sew to the right or left
of the zipper or close to the cord
2. Align the right side of the left side of
3~6
the zipper foot pin with the presser foot
holder, lower the presser foot lever to
attach the foot
3. To insert zippers, consult the zipper
r foot.
package for instructions on how to
right side of the zipper, attach the
prepare zipper placket and place zipper.
illustration in right.
4.
To sew close to the zipper on the right
left side of the zipper, attach the
side, snap the zipper foot onto the presser
he illustration in right.
foot holder on the left side so the needle
passes through the opening on the left
e
side of the foot.
5.
Snap the foot onto the presser foot holder
Sew the right side
on the other side of the foot to sew close
of the zipper.
inserting, ensure that the
to the left side to the zipper.
touch the zipper. Otherwise
eedle break or even injury.

BUTTON SEWING

PRESSER FOOT - BUTTON FITTING FOOT
1.
Attach button fitting foot
2. Push the lever in the direction of the arrow to drop
the feed dog
3. Position your fabric and button under the presser
foot. Lower presser foot. Turn the handwheel
to make sure needle clears both left and right
openings of button
4. Lower the foot and adjust stitch width to match
with needles to right hole of the button.
5. Sew 6-7 stitches (10 on heavy material). Turn
needle to its highest position.
6.
To secure thread, pull both threads to the
backside of the fabric and tie together.
buttonhole foot.
2. Pull the gimp cord under the foot to the front.

Machine Setting

3. Fix the gimp cord to the protruding point on front of foot.
4. Turn the needle down to the starting position on fabric, put down the presser foot.
5. Sew the buttonhole according to page 17.
6. Pull the gimp cord straightly.
7. Cut the gimp cord.
A
Zipper application
2
Attach the zipper foot.
When sewing the right side of the zipper, attach the
zipper foot as the illustration in right.
When sewing the left side of the zipper, attach the
zipper foot as the illustration in right.
Helpful hint:
During zipper inserting, ensure that the
needle do not touch the zipper. Otherwise
it will cause needle break or even injury.
Sew the left side
18 of the zipper.
Sewing buttons
Position your fabric and button under the presser foot. Lower presser foot. Turn the
3~6
Machine Setting
A
Sew the right side
Depends if you sew right or left side of the
of the zipper.
zipper, needle should always be closed to
the zipper
UTILITY STITCHES
Sewing buttons
Machine Setting
C~B
NOTE: 1. Drop the feed dog (Refer to page 4) .
2. You do not have to adjust the stitch length dial.
Position your fabric and button under the presser foot. Lower presser foot. Turn the
handwheel to make sure needle clears both left and right openings of button. Adjust
width if required. Sew 10 stitches across.
When attaching four-hole buttons, first sew the two holes closest to you. Then, slide the
button so that the needle goes into the two holes toward the rear of the sewing machine,
and then sew them in the same way.
Texi Fox 25
To secure thread, cut the upper thread with 25cm of excess, wind it
2
2
3~6
Sew the left side
Sew the right side
of the zipper.
of the zipper.
Sew the left side
of the zipper.
UTILITY STITCHES
Machine Setting
3
C~B
3
1~3
2
1~3 1
2
1
Drop
the
feed
dog
Drop
the
feed
dog
NOTE: 1. Drop the feed dog (Refer to page 4) .
After you finish sewing, set the drop feed
lever to the original position.
2. You do not have to adjust the stitch length dial.
After you finish sewing, set the drop feed
lever to the original position.
EN
79