Tabla de contenido
EN
HELPFUL HINTS
If the machine is not working properly, please first check in this manual whether you
followed exactly its instructions (whether the machine was turned on, the upper
thread was correctly threaded, the bottom thread was correctly inserted into the
bobbin etc., etc.). If the machine still does not sew properly, please contact technical
support.
Problem
Upper thread breaks
Lower thread breaks
Needle breaks
Machine skip stitches
Fabric puckers
Machine makes loose
stitches or loops
86
Cause
Machine not properly threaded
Upper thread tension too tight
Needle bent or blunt
Needle inserted incorrectly
Thread of incorrect size or poor
quality
Bobbin threaded incorrectly
Dirt in the bobbin and hook area
Bobbin case is damaged
Needle inserted incorrectly
Needle bent or blunt
Needle incorrectly screwed
Upper thread tension too tight
Machine doesn't feed the fabric
Incorrect size needle or thread for
fabric being sewn
Needle is hitting the presser foot
Needle inserted incorrectly
Needle bent or blunt
Incorrect size needle or thread for
fabric being sewn
Machine not properly threaded
Upper thread tension too tight
Machine not properly threaded
Incorrect stitch length
Tension not adjusted properly
Incorrect size needle or thread for
fabric being sewn
Texi Fox 25
Correction
Rethread machine
Readjust thread tension
Replace needle for new one
Reinsert needle
Choose correct thread
Rethread the bobbin
Clean the bobbin and hook area
Replace bobbin case
Reinsert needle
Replace needle for new one
Tighten the screw
Readjust thread tension
Check if feed dog lever is on right
position
Choose correct size needle and
thread
Select correct foot and pattern
Reinsert needle
Replace needle for new one
Choose correct size needle and
thread
Rethread machine
Readjust thread tension
Rethread machine
Adjust stitch length
Readjust thread tension
Choose correct size needle and
thread
Capítulos
Tabla de contenido
