Knowing Your Sewing Machine; Opening Accessory Case; Accessories; Connecting The Machine - Texi Fox 25 Manual De Usuario

KNOWING YOUR SEWING MACHINE

OPENING ACCESSORY CASE

Accessories

To open the accessory case, lift up on the
top left side of the table and pull toward
KNOWING YOUR SEWING MACHINE
1. Bobbins (3pcs)
you.
2. Needle 3 pcs and twin needle 1 pc
3. Multi-function screwdriver
Accessories
4. Seam guide(optional)
5. Ripper/Brush
6. Buttonhole foot
1. Bobbins (3pcs)
7. Guide presser foot
2. Needle 3 pcs and twin needle 1 pc
8. Zipper foot
3. Multi-function screwdriver
9. Button fitting foot
4. Seam guide(optional)
ACCESSORIES
5. Ripper/Brush
6. Buttonhole foot
The foot that comes on your sewing machine
7. Guide presser foot
Accessories are provided in the accessory case.
is called zigzag foot and will be used for the
8. Zipper foot
1. Bobbins
9. Button fitting foot majority of your sewing.
2. Set of 3 needles + double needle
3.
Screwdrive
4. Ripper/ Brush
The foot that comes on your sewing machine
5.
Buttonhole foot
is called zigzag foot and will be used for the
Setting up your machine
6. Guide
majority of your sewing.
Bu sure to wipe off any surplus oil from needle
7.
Zipper foot
plate area before using your machine the first
8. Button foot
time.
Setting up your machine
Power line cord/foot control
Bu sure to wipe off any surplus oil from needle

CONNECTING THE MACHINE

Make sure that the sewing machine is turned off (the
plate area before using your machine the first
power switch is set to "O"), and then connect the plug
time.
Place the machine on a stable table.
of the power line and into the appliance inlet and your
Be sure to wipe off any surplus oil from needle
wall outlet.
Power line cord/foot control
plate area before using your machine the first
Sewing speed can be varied the foot control.
Make sure that the sewing machine is turned off (the time. Make sure that the sewing machine is
The harder you press on the control, the faster
power switch is set to "O"), and then connect the plug
turned off (the power switch is set to "O".
machine runs.
of the power line and into the appliance inlet and your
Before connecting the power cord, make sure
wall outlet.
that the voltage and frequency indicated on the
When foot control is disconnected,
NOTE:
machine is the same as in your power source.
the machine will not operate.
Sewing speed can be varied the foot control.
The harder you press on the control, the faster
1.
Connect the power cord to the machine
machine runs.
by inserting the 2-hole plug into the plug
socket.
When foot control is disconnected,
Always disconnect the machine from power
NOTE:
2. Connect the power cord plug to the electric
the machine will not operate.
supply by removing the plug from the wall-outlet.
outlet.
3. Turn „ON" the power switch.
Power/light switch
4. A LED lamp will light up when switch is turned on.
Your machine will not operate until the power/light switch is turned on. The same switch controls
5.
Always disconnect the machine from power To disconnect, turn the power switch to the „OFF" position, then remove plug from outlet.
both the power and the light.
supply by removing the plug from the wall-outlet.
When servicing the machine, or changing needles, etc., machine must be disconnected from
the power supply.
Power/light switch
Your machine will not operate until the power/light switch is turned on. The same switch controls
1
1
1
6
4
6
Power/light
switch "OFF"
Power/light
Texi Fox 25
switch "OFF"
2
2
2
4
5
7
8
5 6 7
4
5
7
8
Power/light
switch "ON"
Power/light
switch "ON"
EN
3
3
3
9 8
9
65
3