Tabla de contenido
EN
Blind stitch
Fold up the fabric as illustrated.
BLIND HEM STITCHING
Lower the presser foot, then loosen the foot holder
screw to place the hem guide between the screw
UNIVERSAL FOOT + GUIDE
and the shank of foot holder. Tighten the screw
making sure the wall of hem guide is placed in the
SAFETY ELASTIC STITCH (E) - Elastic blind
middle of the toes of the presser foot.
stitch for soft, stretchable fabrics
SAFETY STITCH (F) - Regular blind stitch for
normal firm fabrics.
Used for blind hemming in dresses, trouser
leg -this stitch will sew without stitches
showing on right side of fabric. Remember
to match colour of the thread to sewing
material.
Raise the presser foot and place the fabric under the
foot so that the soft fold rests against the wall of hem
Fold up the fabric as illustrated.
1.
Fold up the fabric as illustrated.
guide.
Lower the presser foot, then loosen the foot holder
Distance shown on the illustration
Lower the foot, then stitch slowly for better for better
screw to place the hem guide between the screw
should be around 0,4-0,7 cm.
control so that the zigzag stitches fall on the hen
and the shank of foot holder. Tighten the screw
2.
Lower the presser foot, then loosen
allowance and pierce the soft fold. While sewing,
making sure the wall of hem guide is placed in the
make sure the soft fold runs along the wall of hem
middle of the toes of the presser foot.
the foot holder screw to place the hem
guide.
guide between the screw and the
shank of foot holder. Tighten the screw
making sure the hem guide is placed in
the middle of the presser foot.
3.
Raise the presser foot and place the
Spread the fabric flat with the right side facing up.
fabric under the foot.
4.
Lower the presser foot and sew very
Raise the presser foot and place the fabric under the
slowly for better control, straight
foot so that the soft fold rests against the wall of hem
sticthes should be sew near to the edge
guide.
of teh fabric and zigzag fall on the hen
Lower the foot, then stitch slowly for better for better
and pierce the soft fold.
control so that the zigzag stitches fall on the hen
allowance and pierce the soft fold. While sewing,
5.
While sewing, make sure that fabric is
make sure the soft fold runs along the wall of hem
transported correctly.
guide.
6.
Turn the fabric over when you have
completed sewing.
Spread the fabric flat with the right side facing up.
78
UTILITY STITCHES
Machine Setting
E
Blind stitch
Blind stitch
Fold up the fabric as illustrated.
Lower the presser foot, then loosen the foot holder
screw to place the hem guide between the screw
and the shank of foot holder. Tighten the screw
making sure the wall of hem guide is placed in the
middle of the toes of the presser foot.
Fold up the fabric as illustrated.
Lower the presser foot, then loosen the foot holder
screw to place the hem guide between the screw
Raise the presser foot and place the fabric under the
and the shank of foot holder. Tighten the screw
foot so that the soft fold rests against the wall of hem
making sure the wall of hem guide is placed in the
guide.
middle of the toes of the presser foot.
Lower the foot, then stitch slowly for better for better
control so that the zigzag stitches fall on the hen
allowance and pierce the soft fold. While sewing,
make sure the soft fold runs along the wall of hem
guide.
Raise the presser foot and place the fabric under the
Spread the fabric flat with the right side facing up.
foot so that the soft fold rests against the wall of hem
guide.
Lower the foot, then stitch slowly for better for better
control so that the zigzag stitches fall on the hen
allowance and pierce the soft fold. While sewing,
make sure the soft fold runs along the wall of hem
guide.
Spread the fabric flat with the right side facing up.
UTILITY STITCHES
F
1~4
Machine Setting
E
F
UTILITY STITCHES
+
Machine Setting
E
F
Texi Fox 25
0.5~1
0.5~1
1~4
+
0.5~1
1~4
+
19
19
19
19
Capítulos
Tabla de contenido
