Cleaning The Feed Dog - Texi Fox 25 Manual De Usuario

EN
4. Remove the shuttle.
After finish assemble all parts.

CLEANING THE FEED DOG

CAUTION: Switch off the machine and unplug the
power supply before making below acitivies
Remove the needle and the presserfoot.
Remove the needle plate set screws and remove the
needle plate.
With a brush, clean out dust from the feed dog teeth.
Insert the needle plate.
84
"
5. Clean the shuttle race
with a brush and soft dry
cloth.
Texi Fox 25
6. Before assembling the
shuttle race, oil the shuttle
race using a few drops of fine
qualitysewing machine oil.