Button Sewing - Texi Joy 48 Manual De Operación

INSERT ZIPPERS
Stitch Name
STRAIGHT
STITCH
•
Align the right side of the left side of the zipper foot
pin with the presser foot holder, lower the presser foot
lever to attach the foot.
•
To insert zippers, consult the zipper package for
instructions on how to prepare zipper placket and
place zipper.
•
To sew close to the zipper on the right side, snap the
zipper foot onto the presser foot holder on the left side
so the needle passes through the opening on the left
side of the foot.
•
Snap the foot onto the presser foot holder on the other
side of the foot to sew close to the left side to the
zipper.

BUTTON SEWING

Number
Stitch Name
of stitch
ZIGZAG
1.
Attach the embroidery plate onto the needle plate.
2.
Place the button between the presser foot and the fabric.
NOTE: When sewing four-hole button, first sew the two holes
closest to you. Then, slide the button so that the needle goes
into the two holes toward the rear of the sewing machine, and
then sew them in the same ways.
3. Select zigzag stitch 03
4. Adjust the stitch length by turning the stitch length dial to "0".
5. Adjust the stitch width; ensure the needle correctly goes into
the left and right hole of the button.
NOTE: Turn the handwheel toward you (counterclockwise)
to check that the needle correctly goes into the left and right
hole of the button.
Number Recommended
of stitch stitch width
00 2.5
Recommended
stitch width
Depends on holes
03
in the button
Texi Joy 48
Recommended Type of the presser
stitch width
2.5
Recommended Type of the presser
stitch lenght
Universal + embroidery
0.0
presser foot for sewing
EN
foot
Foot for sewing
zipper
foot
plate or special
buttons
77