How To Start The Sewing Machine; Foot Controller; How To Use The Free Arm - Texi Pierrot Manual De Operación

TEXI Pierrot operation manual
Needle
This overlock uses a family size standard needle.
The specification of needle is 130/705 H (HAx1).
How to open front cover

How to start the sewing machine

Plug in the sewing machine. Press the power switch to position „1", and the indicator will light. Press the power
switch to position „0", the indicator will be extinguished and the power will be off.
When the front is opened the motor will be switched off immediately although the power switch is at position „1".
If you press the foot controller, the sewing machine is still on a POWER OFF status.

Foot controller

Press the foot controller to control the sewing speed.

How to use the free arm

Push the cover to the right as far as it will go (1).
Pull cover down toward you (2).
CAUTION: Be sure front cover is closed when sewing.
109
Replace needle:
1) Turn the hand wheel to raise the needle
to the highest position.
2) Use the enclosed Allen key to loosen the
needle set screw.
3) Insert the needle shank (flat side to back)
into the needle clamp until fully inserted.
4) Tighten the needle set screw again.
1. Allen key
2. Tighten
3. Loosen
4. Needle set screw
1. Power switch
2. Foot controller
1. Pull piece A to the left.
2. Put sleeve or cuff on the arm cover start
the sewing.