Supplying Marine Drive Oil - Yanmar 4HLA-HTP Manual Del Usuario

3.4 Supplying Marine Drive Oil

Marine gear (HSW450A2, HSW630A1)
●
For the marine gear, follow the maker's
instructions.
For MERCRUISER's stern-driven device (BRAVO),
●
supply lube oil in accordance with the
maker's instructions. (4LHA-HTZP/-DTZP/-STZP)
For MERCRUISER's stern-driven device (BRAVO), there is the power steering oil service tank
●
on the engine side. Fill with the specified amount of the power steering oil.
(4LHA-HTZP/-DTZP/-STZP)
①Remove the cap from the power steering
oil service tank by turning it to the right, and
supply the power steering oil.
②Fill with the oil to the upper limit marked on the
dipstick attached to the inside of the cap.
To check the oil level, wipe the dipstick with a
cloth, and then measure the oil level by
inserting the dipstick and tightening the cap.
Fill with the necessary amount of oil.
③Reinstall the cap and tighten.
[NOTICE]
Do not overfill.
Overfilling will cause oil to be sprayed
out during operation and effect the
efficiency of the marine drive.
Power steering
oil service tank
_ _
28
Upper limit
Lower limit