Supplying Engine Lube Oil; Engine Oil Capacity; Supplying Marine Drive Oil - Yanmar 6LPA-DTP Operación Manual

3.3 Supplying Engine Lube Oil

Fill with the specified amount of engine oil.
①Remove the oil filler cap on the top of the
valve rocker cover and fill with oil.
②Remove the oil dipstick and check the level
of the oil with the gauge on the dipstick.
Oil should be filled to the maximum limit on
the dipstick gauge.

Engine oil capacity :

6LPA-DTP/-DTZP : 10.0
6LPA-STP/-STZP : 10.5
③Replace the dipstick and tighten the filler
cap firmly by hand.

3.4 Supplying Marine Drive Oil

Supply lube oil in accordance with the marine
drive instructions.
●For MERCRUISER's stern-driven device (BRAVO) there is a power steering oil service tank on
the engine side. Fill with the specified amount of lube oil.
After taking piping for power steering system.
①Remove the cap from the power steering
oil service tank (on the side of the fresh
water tank) by turning it counter-clockwise,
and insert lube oil.
②Fill with oil to the maximum limit marked on
the dipstick attached to the inside of the cap.
To measure the oil level, wipe the dipstick
with a cloth, and then measure the oil level
by inserting the dipstick and tightening the
cap. Resupply with the necessary amount of
oil under initial operation.
③Replace the cap and tighten it.
[ NOTICE ]
Do not overfill.
Overfilling will cause oil to be sprayed
out from the breather during operation
and into the turbocharger, and lead to
engine problems.
Dipstick
[ NOTICE ]
Do not overfill.
Overfilling will cause oil to be sprayed
out during operation and effect the
efficiency of the marine drive.
Max. Limit
Min. Limit
Oil tank
_ 21 _
Filer cap
Oil inlet
Max. Limit
Min. Limit
6LPA-DTZP 6LPA-STZP