Riester RVS-100 Manual Del Usuario página 84

4. EWS advanced settings
In advanced mode the parameters of the EWS system is accessible
via Parameters and then through an additional tab "EWS".
[SETTINGS] → [ADVANCED] → [PARAMETERS] → [EWS] → [EWS
PARAMETERS]
Settings-Advanced-Parameters-EWS-EWS Parameters
2. Bluetooth Temperature module User Manual
1. Activate Bluetooth
100/200
Make sure that the optional Bluetooth
of the USB ports.
Caution: Use only the original Bluetooth
ster.
The thermometer can be paired in the settings menu.
[SETTINGS] → [ADVANCED] → [NETWORK] → [BLUETOOTH]
Turn Bluetooth status "On". A list of potential devices will be shown,
select the one you intend to pair (Riester tympanic or non-contact
thermometer).
2. The Riester Bluetooth
on the TEMP screen of RVS-100/200. After taking a measurement
the result is automatically transferred to the vital signs monitor.
The correct use of the Riester Bluetooth
bed in the manual of the respective thermometer.
84
and add Bluetooth Thermometer to RVS-
® ®
dongle is plugged into one
®
® dongle supplied by Rie-
® thermometer is activated and indicated
thermometers is descri-
®
Product Information
• Product Model: RVS-100 Vital Signs Monitor
• Product Name: RVS-100 Vital Signs Monitor
• Manufacturer: Rudolf Riester
• After Service Contact Information:
Address:
Rudolf Riester GmbH
Bruckstraße 31
DE-72417 Jungingen
Tel: +49 (0)7477 / 9270-0
[email protected]
Revision History
This manual has a revision number. This revision number changes
whenever the manual is updated due to software or technical
specification change. Contents of this manual are subject to change
without prior notice.
• Document No.: 99361
• Revision number: Rev. B
• Release time: June 2020
Copyright 2020 Rudolf Riester GmbH. All rights reserved.
©