Cylinder And Processing Hazards; Safety Placards-Cylinder And Processing Hazards; Safety Alert Messages-Cylinder And Processing Hazards; (Document Biuuus13) - Milnor M7V4836 Serie Manual Del Usuario

BIUUUS23 (Published) Book specs- Dates: 20071016 / 20071016 / 20101116 Lang: ENG01 Applic: PEU

4. Cylinder and Processing Hazards

Safety Placards—Cylinder and Processing Hazards
4.1.
BIUUUS17]
One or more safety placards on the machine, similar to the following, alert personnel to hazards
related to the cylinder and laundering process.
Figure 3: Cylinder and Processing Hazards
Safety Alert Messages—Cylinder and Processing Hazards
4.2.
[Document BIUUUS13]
The following are instructions about hazards related to the cylinder and laundering process.
DANGER 6 : Entangle and Sever Hazards—Contact with goods being processed can
cause the goods to wrap around your body or limbs and dismember you.
• Do not attempt to open the door or reach into the cylinder until the cylinder is stopped.
• Do not touch goods inside or hanging partially outside the turning cylinder.
• Know the location of all emergency stop switches, pull cords, and/or kick plates and use
them in an emergency to stop machine motion.
• Know the location of the main machine disconnect and use it in an emergency to remove
all electric power from the machine.
WARNING 7 : Crush Hazards—Contact with the turning cylinder can crush your limbs. The
cylinder will repel any object you try to stop it with, possibly causing the object to strike or stab
you.
• Lock out and tag out power at the main machine disconnect before reaching into the
Cylinder and Processing Hazards
13
[Document
PELLERIN MILNOR CORPORATION
loading