Tabla de contenido
LIST OF ESSENTIAL SAFETY/HEALTH REQUIREMENTS
1) Feeding pressure check
2) Lubricated compressed air feeding connection
3) Stability of the machine
4) Start up of working cycle
5) Protection of working area
6) Emergency
7) Operator
8) Lighting
9) Molds or tools to be connected to the press
OP-1
OP-TR 1
OP-2M-1
A 3 bar = Kg
At
At
A 6 bar = Kg
3
47
78
95
156
6
it shall not exceed 6 bar
it shall be equipped with on/off manual valve controlled
by the operator and provided with dump valve
it shall be sturdy fi xed to the working table (see page 24)
or on an appropriate base in order to prevent any tilting
or falling
Equipped with bi-manual control for operator's safety
Equipped with safety device delimiting the perimeter of
the unit working area
Equipped with emergency push button to stop the machi-
ne; it controls the returning action of the mobile element
on PMS
The machine shall be operated by only one operator.
His task is to load the piece to be processed,act on the bi-
manual control to start the machine and at the end of the
cycle (operation occurred) ,unload the processed piece.
No light source is provided on the machine if this is in-
stalled in a normally lit environment (230 lux). Any tools
or equipment or molds which due to their nature would
hinder or create shadow zones , shall be duly considered
by the machine operator and lit accordingly.
Molds or production tools to be connected to the mobile-
mobile element element of the press shall have a weight
lower than 25% of the pressure/force adjusted on the
approach stroke. See plate on the machine.
TRAILING FORCE
5
8
101
151
202
302
15-45
13
21
249
500
498
1000
42
500
1000
Tabla de contenido
