Truck Data Plate; Standard Version Specifications; Performance Data For Standard Trucks; Dimensions - EP Equipment EPT20-15HJ Manual De Usuario

1.3.1. Truck data plate

Item Description
1 Manufacturer
2 Serial no.
3 Type
4 Rated capacity (kg)
Please quote the truck serial number (2) for any queries regarding the truck or when orde-
ring spare parts.
Model number example
1. Electric pallet truck
2. Capacity: 15=1,500 kg
3. Series label

1.4.2. Dimensions

Item Description
X Load distance
Y Wheelbase
h3 Lift height
b11 Tread Load side
h13 Fork height Lowered
Height of tiller arm in
h14
operating position
Max
L1 Overall length
L2 Length to face of forks
b1 Overall width
s Thickness
e Fork dimensions Width
L Length
b5 Fork spread
m2 Ground clearance
Wa Outer turning radius
1000×1200 pallet
crossways
Ast Aisle width*
800×1200 pallet
lengthways
* Including safety distance A = 200 mm
A170148 (EPT20-15HJ)
Item Description
5 Fork width (mm)
6 Fork length (mm)
7 Nominal battery capacity (Ah)
8 Weight including battery (kg)
9
A170148 A170149
883/946 889/946
1152/1215 1261/1205
115 115
410 (535) 410 (535)
85 (75) 80
Min 715 790
1280 1225
1588 1638
438 488
558 (685) 568 (685)
50 50
150 150
1143 1150
558 (685) 560 (685)
35 30
1415 1485
1669 1739
1869 1939
11

1.4. Standard version specifications

1.4.1. Performance data for standard trucks

Item
Q
C
Travel speed
Lifting speed
Lowering speed
Maximum gradeabi-
lity, S2 5 min.
Service weight
Axle loading, laden
Axle loading, unladen
Motor
Battery
A170149 (EPT20-15ET)
Unit
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm

2. TRANSPORT AND COMMISSIONING

mm

2.1. Using the truck for the first time

mm
Only operate the truck using a battery power supply. Rectified AC current will damage the
mm electronic components. Cable connections to the battery (tow leads) must be less than 6
m. Preparing the truck for operation after delivery or transport Procedure:
mm
- Check the equipment is complete.
- Check the hydraulic oil level.
- Install the battery if required, (see «4.4 Battery removal and installation»). Do not damage
the battery cable.
- Charge the battery, (see «4.3 Charging the battery»). When the truck is parked, the sur-
face of the tyres will flatten. This flattening will disappear after a short period of operation.

2.2. Breaking in the truck

For the best performance, we recommended that the machine is operated with light loads
the first few times it is operated. In particular, the requirements given below should be
observed once the machine has been operated for a total of 100 hours.
- The new battery must not be allowed to over-discharge when used in the early stages of
its life cycle. Please charge the battery when the battery level is at less than 20%.
- Ensure that the preventative maintenance tasks specified are completed thoroughly and
with due care.
- Avoid stopping, starting or turning suddenly.
- It is recommended that you complete oil changes and lubricate parts before the speci-
fied dates.
- Limited load is 70–80% of the rated load.
Description
Load capacity
Load centre
Laden
Unladen
Laden
Unladen
Laden
Unladen
Laden
Unladen
Service brake Electromagnetic Electromagnetic
Incl. battery
Operator/load side
Operator/load side
Drive
Lift
Tyre type, operator/load side
Tyre size, operator side
Tyre size, load side
Maintenance
Type
free battery
Voltage/rated capacity (5h)
Weight
Sound level at operator's ear
10
12
A170148 A170149 Unit
1500 1500 kg
600 600 mm
3.5 4.5 km/h
4.0 5 km/h
10 0.029 m/s
10 0.038 m/s
/ 0.046 m/s
/ 0.033 m/s
2 2 %
6 6 %
140 195 kg
539/1098 565/1130 kg
110/30 155/40 kg
0.65 0.65 KW
Manual 0.84 KW
PU/PU PU/PU
ø210x70 ø210x70 mm
2-ø80x60
2-ø80x60 mm
(ø74x88)
Maintenance
free battery
2x12/30 2x12/65 V/Ah
9.5x2 22.5x2 kg
74 74 dB(A)