VM Motori D703E2 Manual De Instrucciones página 114

Ocultar thumbs Ver también para D703E2:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

In the state of California, diesel engine
exhaust gases are recognized as one
of the main causes of cancerous tu-
mors, damage to reproductive organs
GB
and deformities in unborn children.
Whenever an engine enters the state of
California, or states or countries which
adopt the same legislation, adequa-
te information must be provided to
confirm the risks associated with the
engine's components and the exhaust
gases which it produces.
– The manufacturer cannot be held
responsible for any damage resulting from
the misuse of the engine, from the failure
to follow the indications contained in this
manual and from any tampering with or
change made without the manufacturer's
authorization.
– If appropriate, before using the engine
for the first time, after gathering all the
necessary information, simulate a few
trial manoeuvres to identify the controls
and their main functions, especially those
related with starting and stop operations.
– Do not operate the engine in a closed
and insufficiently ventilated environment;
the exhaust fumes are harmful and can
have serious consequences on people's
health.
– Do not keep using the engine if ano-
malies are detected and in particular if
suspect vibrations occur.
– In case of anomaly, stop immediately
the engine or reduce the speed as much
as possible and reach the closest assi-
stance centre.
English
D700-750E2_E3
– Start again the engine only when the
normal operating conditions have been
restored.
– Unless otherwise stated, all interven-
tions should be carried out when the en-
gine has been stopped, cooled down and
the ignition key has been removed. Those
authorized to carry out these interventions
should follow all the precautions needed
to guarantee the safety of the people
involved, in compliance with the require-
ments laid down in the applicable legisla-
tion regarding safety at the workplace.
– Keep the equipment as much efficient
as possible and carry out the scheduled
maintenance operations established by
the manufacturer. A good maintenance
will ensure the highest performance, a
longer working lifetime and a constant
compliance with safety requirements.
– Replace any worn part with original
spare parts. Use the oils and greases re-
commended by the manufacturer. All this
will ensure the engine good operation and
the prescribed safety level.
– Do not throw away any polluting ma-
terial in the environment. Carry out their
disposal in compliance with the relevant
legislation in force.
– During all maintenance operations
always use the individual protection
clothing and/or devices indicated in the
operating instructions supplied by the
manufacturer and those provided by the
applicable legislation concerning safety at
the workplace.
– All maintenance operations should be
carried out by using suitable and efficient
equipment and tools.
34
VM p/n 42432097F Ed.4 - 2015-05
Tabla de contenido
loading

Tabla de contenido