Fuel Filter Replacement - VM Motori D703E2 Manual De Instrucciones

D700-750E2_E3

FUEL FILTER REPLACEMENT

Follow the procedure below.
1- Turn off the engine and remove the
GB
ignition key.
Fuel Filter (Z)
2- Let the engine cool down adequately to
avoid being burnt.
3- Prepare a container to collect any leak.
4- Remove the filter (Z) using the tool
provided.
5- Fill the new filter with the fuel from the
filter being replaced.
6- Lubricate the gasket of the new filter
before mounting it.
7- Fit the new filter using the tool provi-
ded.
8- Bleed air from the fuel supply circuit
(See "Fuel supply circuit bleeding").
9- Turn the engine on and check for any
fuel leaks.
In the event of fuel leaks, identify and
eliminate the cause.
If the problem persists, contact one of
the manufacturer's authorised service
centres.
Do not throw away any polluting
material in the environment. Carry out
their disposal in compliance with the
relevant legislation in force.
English 66
VM p/n 42432097F Ed.4 - 2015-05