Unpacking - VM Motori D703E2 Manual De Instrucciones

D700-750E2_E3
In order to guarantee the perfect con-
servation of all engine components, an
"overseas" packaging should be used in
case of maritime transport.
GB
The packaging contains all the informa-
tion needed to carry out the loading and
unloading operations.
During transport, make sure the load
is properly secured to the means of
transport to avoid unexpected displace-
ments.
When transporting the uncovered engine
by road, use the lifting points provided to
secure it steadily and prevent compo-
nents from being damaged

UNPACKING

Follow the procedure below.
1- Remove the cover of the packaging.
The packaging includes a bag with all
the relevant technical documentation
and standard components.
2-While unpacking, make sure the
components are intact and their quantity
is correct.
Screw (A)
3- Place the lifting device as shown in
the figure.
Stay (B)
4- Loosen the screws (A) and disassem-
ble the side supports (B).
5- Move the engine to the installation
area. If necessary, keep the material in
case you need to pack the engine in the
future.
In case of any damage or missing
part, contact the manufacturer's As-
sistance Service to establish the pro-
cedure to be adopted. The packaging
material should be suitably elimina-
ted in compliance with the applicable
legislation.
English 37
VM p/n 42432097F Ed.4 - 2015-05