Belt Replacement; Engine Disposal - VM Motori D703E2 Manual De Instrucciones

D700-750E2_E3

BELT REPLACEMENT

Follow the procedure below.
1- Turn off the engine and remove the
GB
Nut (A)
ignition key.
2- Let the engine cool down adequately
to avoid being burnt.
3- Adjust nut (A) to loosen the transmis-
sion belts.
4-Remove the belt(B) and replace it. Trasmission Belt (B)
5- Tighten the belt (See "How to adjust
the tension of the driving belt").
– Before restarting the engine, make
sure there are no tools or other mate-
rial left near the moving parts.
– Do not throw away any replaced
part in the environment. Carry out
their disposa in compliance with the
relevant legislation in force.

ENGINE DISPOSAL

This operation should be carried out by
experienced operators, in compliance with
the legislation in force concerning safety
at the workplace.
Do not throw away non bio-degradable
products and non ferrous components
(rubber, PVC, resins, etc.).
While decommissioning the engine, divide
all the components depending on their
chemical composition and dispose of
them accordingly.
English 72
VM p/n 42432097F Ed.4 - 2015-05