VM Motori D703E2 Manual De Instrucciones página 142

R750EU5 - R750IE3
ENGINE COOLANT LEVEL CHECK
Follow the procedure below.
Filler cap (P)
1- Start the engine and bring it to the ope-
GB
rating temperature (70÷80 °C).
2- Turn off the engine and remove the
ignition key.
3- Let the engine cool down properly.
4-Unscrew the plug (P).
Open the plug gently to drain the
pressure.
5- Top up, if necessary, from plug (P).
(As for the liquid quantity and type, see
"Technical data").
– When topping up, only use a mixture
with the same composition as the one
already contained in the engine coo-
ling system.
– The fluid level must be up to the base
of the neck into which the radiator plug
is screwed.
– For further information, please con-
sult the documentation provided by the
manufacturer of the vehicle/device in
which the engine is installed.
English 62
VM p/n 42432097F Ed.4 - 2015-05