VM Motori D703E2 Manual De Instrucciones página 132

Frequency (1)
GB
Every 500
hours
Every 1000
hours
Every 4000
hours
Every 8000
hours
(1) If an hour counter is not available, the fre-
quency of the interventions should be calculated
on the basis of a calendar day: one calendar day
corresponds to 12 hours of operation.
(2) In severe working conditions, such as dusty
environments and operation at extreme loads,
the engine oil must be changed every 150
working hours. If the engine has not been in ope-
ration for the length of time indicated, the oil must
still be changed at least once a year.
(3) If the engine has not been in operation for
the length of time indicated, the filter must still be
changed at least once every 12 months.
(4) If the engine has not been in operation for
the length of time indicated, the fluid must still be
changed at least once every 24 months.
(5) If the engine has not been in operation for
the length of time indicated, the belt must still be
changed at least once every 24 months.
(6) In engine D754SE3, TE3, IE3 models with a
low capacity oil sump, a special plate is applied
on the cover of the engine valves to indicate that
the engine oil and the oil filter must be changed
every 200 hours instead of every 300.
English
Type of inter-
Component
vention
Coolant (4) Replace
Air filter Replace
Preheating glow Check integrity
plugs of components
Transmission
Replace
belt (5)
Fuel tank Clean
Performing
Engine
partial overhaul
Performing ge-
Engine
neral overhaul
D700-750E2_E3
Intervention
procedures
Apply to an
authorised
workshop
Apply to an
authorised
workshop
52
VM p/n 42432097F Ed.4 - 2015-05
Reference
See Coolant
replacement
Apply to an
authorised
workshop
See Belt repla-
cement