Operation Procedure - Yanmar 6LPA-DTP Operación Manual

4.8 Operation Procedure

The following diagram shows the procedures for operation explained up to this point.
Parts of the operation may differ depending on the marine drive and remote control system being
used. Accompanying operation manuals should be read carefully and understood.
Inspection Before Starting
Starting the Engine
Marine Drive Clutch
Clutch Control Lever
Starter Switch
OFF ON
ON START
ON
Alarm Lamps
Control Panel
Warming-up
Speed Lever
Stopping the Boat/Preparing
to Stop the Engine
Speed Lever
Marine Drive Clutch
Speed Lever
Put in NEUTRAL
Checking the Alarm Devices
Turn the key for no longer than 15 secs.
Remove hand from key after starting.
Checking for Problems
Low Speed Position
1500rpm or lower for 5 mins. or longer
Checking the Engine During
Operation
Low Speed Position
1000rpm or lower
Put in NEUTRAL
Low Speed⇔High Speed
Racing the Engine
Repeat Several Times
Starting Operation
Marine Drive Clutch
Speed Lever
Speed Lever
Cooling Down the Engine
Starter Switch
Stop Button
_ 32 _
Engage Clutch
Forward or Reverse
Adjust Speed
Low Speed Position
1000rpm or lower
For 5 mins. or longer
ON OFF
Engine Stops