Lube Oil; Cooling Water - Yanmar 6LPA-DTP Operación Manual

3.1.2 Lube oil

(1) Selection of Engine Oil
Use the following lube oil:
*API Classification............CD
(Standards of America Petroleum Institute)
*SAE Viscosity ...............15W40
(Standards of Society of Automotive
(2) Selection of Marine Drive Oil
Refer to the operation manual for the marine drive unit for the selection of the proper lube oil.
•
For MERCRUISER's stern-driven device (BRAVO) use the following lube oil.
System Oil
Drive oil
Power steering oil
(6LPA-DTZP/-STZP
Power trim oil
®
Quicksilver is registered trademark of Brunswick Corporatoin.
For further more instructions, refer to the maker's manual.
•
Follow the maker's instructions for the marine gears.
(
HSW630A1(6LPA-DTP)
(3) Handling the Lube Oil
•
When handling and storing lube oil, be careful not to allow dust and water to enter the lube oil.
Clean around the filler port before refilling.
•
Do not mix lube oils of different types or brands.
Mixing may reduce the lubricating performance. Different oils are used for the engine and the
marine drive unit.
Be careful to use the correct oil for each one and store in separate clearly labeled containers.

3.1.3 Cooling Water

[NOTICE]
Be sure to add Long Life Coolant /Antifreeze (LLC) to cooling fresh water.
In cold seasons, the LLC is especially important.
Without LLC, cooling performance will decrease due to scale and rust in the
cooling water line. Without LLC, cooling water will freeze and expand, breaking
various parts.
Engineering)
Specified lube oil
®
Quicksilver
®
Quicksilver
®
Quicksilver
or SAE 10W-30 or 10W-40 engine oil
)
(6LPA-STP)
[NOTICE]
Using other than the specified lube oil
will lead to seizure of parts inside the
engine and gear device, abnormal
wear, and shorten engine life. It will
also effect the starting ability and
power output .
High Performance Gear Lube
Power Trim and Steering Fluid or Dexlone -II
Power Trim and Steering Fluid
_ 18 _
6LPA-DTZP 6LPA-STZP