Spare Parts; Product Warranty; Handling And Storage - Xylem LOWARA e-SVE Traducción De Las Instrucciones Originales

possible negative effects on the environment and on
health and favors the re-use and / or recycling of the
materials it is composed of the equipment.
WEEE other than WEEE from private households:
The separate collection of this equipment at the end of
its life is organized and managed by the producer
The user who wants to get rid of this equipment can
then contact the producer and follow the system that it
has adopted to allow the separate collection of
equipment at the end of life, or select a supply chain
independently authorized to manage.
UK
INFORMATION TO USERS pursuant to art. 44 of the
The Waste Electrical and Electronic Equipment
Regulations 2013 (S. I. 2013 No. 3113). The crossed
bin symbol on the appliance or on its packaging
indicates that the product at the end of its useful life
must be collected separately and not disposed of
together with other mixed urban waste. Appropriate
separate collection for the subsequent start-up of the
disused equipment for recycling, treatment and
environmentally compatible disposal helps to avoid
possible negative effects on the environment and on
health and favors the re-use and / or recycling of the
materials it is composed of the equipment.
WEEE other than WEEE from private households:
The separate collection of this equipment at the end of
its life is organized and managed by the producer
The user who wants to get rid of this equipment can
then contact the producer and follow the system that it
has adopted to allow the separate collection of
equipment at the end of life, or select a supply chain
independently authorized to manage.
1.2.5 Sites exposed to ionizing
radiations
WARNING: Ionizing radiation hazard
If the product has been exposed to ionizing
radiations, implement the necessary safety
measures for the protection of people. If the
product needs to be despatched, inform the
carrier and the recipient accordingly, so that
appropriate safety measures can be put in
place.
1.3

Spare parts

When contacting Xylem or the Authorised Distributor
to request technical information or spare parts, always
indicate the product type and code.
1.4

Product warranty

For information on the warranty refer to the
documentation of the sale contract.
1 Producer of EEE as per Directive 2012/19/EU
2
Producer of EEE as per WEEE Regulations 2013
2
Inspect the package
1. Check that quantity, descriptions and product codes
match the order.
1
.
2. Check the packaging for any damage or missing
components.
3. In case of immediately detectable damage or
missing parts:
• Accept the goods with reserve, indicating any
findings on the transport document, or
• Reject the goods, indicating the reason on the
transport document.
In both cases, promptly contact Xylem or the
Authorised Distributor from whom the product was
purchased.
Unpacking and inspection of the unit
1. Remove the packaging material from the product.
2. Release the product by removing the screws and/or
cutting the straps, if fitted.
3. Check the product for integrity and to make sure
that there are no missing components.
4. In case of damage or missing components,
promptly contact Xylem or the Authorised Distributor
2 .
2.1
The unit must be harnessed and lifted as shown in
Figure 1.
2.2
The product must be stored:
• In a covered and dry place
• Away from heat sources
en – Original Instructions

Handling and Storage

CAUTION: Cut and abrasion hazard
Always wear personal protective equipment.
Unit handling
WARNING: Crushing hazard (limbs)
• The product and its components may be
heavy: risk of crushing
• Always wear personal protective
equipment
• Manual handling of the product and its
components must be in compliance with
the current regulations on "manual load
handling", to avoid unfavourable ergonomic
conditions causing risks of back-spine
injury.
• Use cranes, ropes, lifting straps, hooks and
clasps that comply with current regulations
and that are suitable for the specific use
• Make sure that the harnessing does not damage the unit
• During the lifting operations, always avoid
sudden movements that could compromise
the stability of the load
• During handling, make sure to avoid injury
to people and animals, and/or damage to
property.
Storage
13