Disposal Of Packaging And Product; Spare Parts - Xylem LOWARA e-MPA Manual De Instalación, Funcionamento Y Mantenimiento

NOTICE:
Special symbols
Some hazard categories have specific symbols,
as shown in the following table.
Electrical hazard
Electrical
Hazard:
Hot surface hazard
Hot surface hazards are indicated by a specific
symbol that replaces the typical hazard level
symbols:
CAUTION:
Description of user and installer symbols
Specific information for personnel in
charge of installing the product in the
system (plumbing or electrical aspects, or
both) or in charge of maintenance.
Specific information for users of the
product.
Instructions
The instructions and warnings that are provided
in this manual concern the standard version, as
described in the sales document. Special version
pumps may be supplied with supplementary
instruction leaflets. Refer to sales contract for
any modifications or special version
characteristics. For instructions, situations, or
events that is not considered in this manual or
the sales document, contact the nearest Service
Center.
1.3 Disposal of packaging and
product
Observe the local regulations and codes in force
regarding sorted waste disposal.
1.4 Warranty
For information about warranty, see the sales
contract.
1.5

Spare parts

WARNING:
Only use original spare parts to replace
any worn or defective components. The
use of unsuitable spare parts may
cause malfunctions, damage, and
injuries as well as void the guarantee.
Notices are used
when there is a
risk of equipment
damage or
decreased
performance, but
not personal
injury.
Magnetic fields
hazard
CAUTION:
CAUTION:
Always specify the exact product type
and part number when requesting
technical information or spare parts
from the Sales and Service
Department.
For more information about the product's spare
parts, visit sales network's website.
1.6 DECLARATIONS OF
CONFORMITY
1.6.1 EC Declaration of Conformity
(Original)
Xylem Service Italia S.r.l., with headquarters in Via
Vittorio Lombardi 14 - 36075 Montecchio
Maggiore VI - Italy, hereby declares that the
product:
Electric pump unit (see label on first page)
fulfills the relevant provisions of the following
European directives:

Machinery 2006/42/EC (ANNEX II - natural
or legal person authorised to compile the
technical file: Xylem Service Italia S.r.l.)

Eco-design 2009/125/EC, Regulation (EC)
No 640/2009 & Regulation (EU) No 4/2014
(Motor 3 ~, 50 Hz, PN ≥ 0,75 kW) if IE2 or
IE3 marked,
and the following technical standards

EN ISO 12100:2010, EN
809:1998+A1:2009, EN 60204-
1:2006+A1:2009

EN 60034-30:2009, EN 60034-30-1:2014
Montecchio Maggiore, 01.02.2017
Amedeo Valente
(Director of Engineering and R&D)
rev.00
1.6.2 EC Declaration of Conformity
(No EMCD16)
1. Apparatus model/Product:
see label on first page
2. Name and address of the manufacturer:
Xylem Service Italia S.r.l.
Via Vittorio Lombardi 14
36075 Montecchio Maggiore VI
Italy
3. This declaration of conformity is issued
under the sole responsibility of the
manufacturer.
4. Object of the declaration:
electric pump
en - Original instructions
15