Ambu aScope Duodeno Manual Del Usuario página 21

Possible Problem
Distal end does not
angulate when control
wheel is operated
Max. bending angles cannot
be achieved
Elevator does not work or
moves in a restricted manner
Endoscopic accessory
protrudes from the distal end
and cannot be withdrawn
Bending section angulates in
opposite direction
8.2. Rinsing and Insufflation
Possible Problem
Rinsing not possible
Insufflation tubing
cannot be connected
Continuous insufflation
without operating
insufflation/rinsing valve
Insufficient insufflation
Possible Cause
aScope™ Duodeno
is defective
aScope™ Duodeno
is defective
aScope™ Duodeno
is defective
Elevator is raised
aScope™ Duodeno
is defective
Possible Cause
No bottle with
sterile water
connected or water
bottle is empty
Rinsing tubing not
properly connected
Rinsing pump
defective
aScope™ Duodeno
is defective
Insufflation tubing
not compatible
Insufflation tubing
is connected to the
incorrect connector
Insufflation/ rinsing
valve opening
is blocked
Insufflator not
compatible or not
properly adjusted
CO₂ -Source is empty
Suction is activated
Solution
Withdraw the aScope™ Duodeno
carefully and connect a new
aScope™ Duodeno
Withdraw the aScope™ Duodeno
carefully and connect a new
aScope™ Duodeno
Withdraw the aScope™ Duodeno
and connect a new aScope™
Duodeno
Lower the elevator
Withdraw the aScope™ Duodeno
carefully and connect a new
aScope™ Duodeno
Solution
Put a new bottle with sterile water
in the bottle holder and connect it
with the aScope™ Duodeno
Connect the rinsing tubing
properly to the aScope™ Duodeno
See troubleshooting section of
the aBox™ Duodeno
Withdraw the aScope™ Duodeno
and connect a new aScope™
Duodeno
Replace with a compatible
insufflation tubing
Connect the insufflation tubing to
the right connector
Withdraw the aScope™ Duodeno
carefully and connect a new
aScope™ Duodeno
Connect a compatible insufflator.
Adjust insufflator settings
Connect a new CO₂ source
Deactivate suction
21