Chapter 7. Technical Specifications; Performance Characteristics; General; Dimensions And Weight - Bolder Surgical CoolSeal Generator Instrucciones De Uso

Chapter 7.
All specifications are nominal and subject to change without notice.
A specification referred to as "Typical" is within ± 20% of a stated value at room temperature (25°C / 77°F) and
a nominal line input voltage.
Caution
Read all warnings, cautions, and instructions provided with this generator before use. Specific instructions for
CoolSeal instruments are not included in this manual. Refer to the CoolSeal
™
warnings, cautions, and instructions for its use.

Performance Characteristics

General

Output configuration:
Cooling:
Display:
Connector ports:
Mounting:

Dimensions and Weight

Width:
Depth:
Height:
Weight:

Operating Parameters

Ambient temperature range:
Relative humidity:
Atmospheric pressure:
Warm-up time:

Transport and Storage

Ambient temperature range:
Relative humidity:
Atmospheric pressure:

Internal Memory

Nonvolatile:
Storage capacity:
Bolder Surgical
Technical Specifications
Isolated output
Ambient natural convection
Indicator lamps and power stand-by switch
LED illuminated connector detection
Operating room boom systems
Any stable, flat surface such as a table or cart top
30.5 cm (12 in.)
38.1 cm (15 in.)
10.9 cm (4.3 in.)
5.4 kg (12 lbs.)
+10°C to +35°C
30% to 75% (non-condensing)
67 kilopascals to 111 kilopascals
If transported or stored at temperatures outside the operating temperature range,
allow one hour for the CoolSeal
-20°C to +60°C
0% to 90% (non-condensing)
46 kilopascals to 111 kilopascals
RAM
Memory can store information for the last 2000 seal cycles. Data is not patient specific
and not user accessible.
Generator to reach operating temperature before use.
™
Page | 23
instrument's instructions for use for
™
en - CoolSeal™ Generator