Connecting A Coolseal ™ Instrument; Cleaning The Coolseal ™ Generator; Servicing The Coolseal ™ Generator - Bolder Surgical CoolSeal Generator Instrucciones De Uso

Connecting a CoolSeal
Warning
Electric Shock Hazard
• Do not connect wet instruments to the CoolSeal
• Ensure that all instruments are correctly connected and that no metal is exposed at any connection point
Properly seat the instrument in the receptacle. Improper connection may result in inadvertent instrument activation
or other potentially hazardous conditions. Follow the instructions provided with CoolSeal
The instrument receptacle on this system is designed to accept only one instrument at a time. Do not attempt to
connect more than one instrument at a time into a given receptacle. Doing so will cause simultaneous activation of
the instruments.
Caution
Inspect instruments and cords for breaks, cracks, nicks and other damage before every use. If damaged, do not use.
Damaged instruments or cords may result in injury or electrical shock to the patient or surgical team.
Cleaning the CoolSeal
Warning
Electric Shock Hazard
Always turn off and unplug the CoolSeal
Servicing the CoolSeal
Warning
Electric Shock Hazard
Do not remove the CoolSeal
Do not attempt to service the CoolSeal
technician.
Caution
The CoolSeal
™
obtain instructions from Bolder Surgical (call 866.683.1743) or contact your local sales representative to discuss local
waste disposal solutions and processes. The CoolSeal
such as computers. There are no radioactive substances, batteries, or hazardous liquids that may leak in the
CoolSeal Generator.
™
Bolder Surgical
Instrument
™
Generator
™
™
Generator
™
Generator cover.
™
Generator. All service and repair must be conducted by a Bolder Surgical
™
Generator must not be disposed of at the end of life with other waste. To recycle waste equipment,
Generator
™
Generator before cleaning.
Generator poses disposal risks similar to consumer electronics
™
Page | 10
Vessel Sealing Instruments.
™
™
en - CoolSeal™ Generator