Fahl TRACHEOSILC Manual Del Usuario página 182

TRACHEOSILC
DE/EN
TRACHEOSILC
Alle in den Tabellen genannten Maße sind Standardmaße.
Sonderanfertigungen sind nach Absprache möglich!
All measurements listed in the tables below are for standard cannulas.
Customised cannulas are available upon request.
GR
05
06
07
7,5
08
8,5
09
9,5
Hinweise zur Größenbestimmung:
Alle Angaben in mm | GR = Größe | AD1 = Außendurchmesser Kanülenschild | AD2 = Außen-
durchmesser Kanülenspitze | ID1 = Innendurch messer Kanülenspitze der Außenkanüle | ID2 =
Innendurchmesser Kanülenspitze der Innenkanüle | L1 AB = Länge über den Außen-
bogen | L2 MB = Länge über Mittelbogen | ø-CD = CUFF-Durchmesser | θ-BW=
Biegewinkel
Sizing information:
All lenghts in mm | GR = Size | AD1 = Outer diameter at the neck flange | AD2 = Outer diam-
eter at cannula tip | ID1 = Inner diameter at the cannula tip of the outer cannula | ID2 = In-
ner diameter at the cannula tip of the inner cannula | L1 AB = Length over the outer curve
| L2 MB = Length over the middle curve | ø-CD = CUFF diameter | θ-BW= Bending angle
VARIO CUFF /
®
VARIO CUFF SUCTION
®
GRÖSSENTABELLE - SIZE TABLE
AD1 AD2
7,3 7,3
8,7 8,7
10,0 10,0
10,7 10,7
11,0 11,0
11,7 11,7
12,3 12,3
13,3 13,3
ID1 L1 AB L2 MB
5,0 57,0
6,0 63,0
7,0 71,0
7,5 73,0
8,0 75,0
8,5 78,0
9,0 80,0
9,5 83,0
182
Θ BW Ø CD
52,0 110°
59,0 110°
68,0 110°
69,0 110°
71,0 110°
72,0 110°
74,0 110°
79,0 110°
15,0
17,0
19,0
23,0
23,0
23,0
23,0
26,0