Idiomas disponibles
Idiomas disponibles
Mobis
Buffetcart Plus
®
Brief guide
Observe the operating instructions
The brief guide does not take the place of the operating
instructions. Observe the information in the operating
instructions.
Cooling function
The Mobis Buffetcart cools its items using a N'Ice & Easy®
cold storage unit. During cooling times, the cold storage unit
is cooled. A fan-assisted cooling distributes the cold in the
cooled drawer block. During serving time, the cooled cold
storage unit can be disconnected from the mains. The con-
trol system cools the cold storage unit in line with the pro-
grammed serving times.
■
Connect the Mobis Buffetcart to the mains.
■
You can operate the Mobis Buffetcart during the indicated
serving times without it being connected to a power
supply.
■
Outside serving time, you can disconnect the Mobis Buf-
fetcart from the mains for approx. 3 minutes.
■
Always leave the fan-assisted cooling switched on.
■
Observe the set serving times in the table.
Serving time
Start
Putting the transport trolley into operation
The transport trolley must be pre-cooled for 12 hours to prop-
erly keep food cold when not connected to the mains.
1.
Connect the transport trolley to the power supply.
2.
Check the provided socket is properly connected.
3.
Press the on/off switch
�� The display shows the current temperature in the
cooling chamber.
Set temperature
1.
Press the SET button
�� The display shows the required temperature.
2.
Hold down the SET button
Down buttons
ture.
�� The required temperature is now changed.
End
.
.
and use the Up and
to select the required tempera-
Load transport trolley
1.
Secure the transport trolley with the locks.
2.
Check the temperature in the display.
3.
Load the transport trolley. Note the maximum height for
GN containers.
Serving food
1.
Open the drawers only briefly for removal.
2.
Close the drawers immediately after removal.
Moving the transport trolley
WARNING
Contusion hazard
Transport carts rolling in an uncontrolled way may crush
persons.
−
Never leave the transport cart to roll unattended.
−
Only drive uphill or downhill if you can control the trans-
port cart. If necessary, involve a second person.
−
Only park the transport cart on level surfaces.
−
Each time you park the transport cart, secure it with both
locks against rolling away.
−
Fix the wheels in the "straight ahead" position.
1.
Pull out the mains plug.
2.
Release the castor locks.
�� You can move the transport trolley.
3.
Secure the transport trolley with the locks when sta-
tionary.
Direction lock wheels (optional)
With the central lock tread, the wheels are fixed in the
"straight ahead" position.
Lock the direction of the wheels as shown in the illustra-
tion.
�� When the direction of the castors is fixed, the trans-
port trolley is more stable when travelling on longer
routes.
�� The direction lock snaps in audibly.
You can release the direction lock for manoeuvring in tight
spaces.
