Idiomas disponibles
Idiomas disponibles
Operating instructions
6
Operation
It is important that the cooling device is completely cooled before first
use. This is how to do it:
1.
Reconnect the transport cart to the power supply with the sup-
plied connection cable.
2.
Press the on/off switch.
�� The display shows the current temperature inside the cooling
compartment.
3.
If necessary, adjust the required temperature. The factory default
setting is 4 °C, see ⮫ 'Operating the cooling system' on page 21
4.
Close all drawers.
5.
Cover the cooling plate with the cover.
6.
Leave the transport cart connected to the power supply continu-
ously for at least 12 hours.
�� The transport cart is completely cooled.
�� The cart can be loaded, separated from the power supply, and
used for serving food.
6.1
Operating the transport cart
Fig. 5: Controls on the Buffetcart with HDS Alma drive
1
Speed selector switch
2
On/off switch with key
3
Emergency stop button.
4
Toggle switch for speed selection
5
Push handle
Mobis® Buffetcart Plus
20 / 42
