Reception Of The Machine; Unpacking - OEM VOLTAIRE Manual De Uso Y Mantenimiento

VOLTAIRE
Technical data - Transport and unpacking

2.3 - RECEPTION OF THE MACHINE

Upon reception of the machine make sure that the pack-
ing is complete and not damaged. Should the packing
be complete, remove it as specify at point 2.4 (aside
from different manufacturer's instructions).
Check if the instruction booklet is inside the packing
as well as the components specified in the transport
documentation.
In case any damage or defect is found:
a- Inform immediately the transport company and your
agent, both by phone and by registered letter with
return receipt;
b- Manufacturer shall also be informed.
The oven is made up of three distinct parts, support,
oven, chimney.
Eeach part is packed, separately; on installation, the
components are assembled.
2.4 - UNPACKING (Fig. 3)
To remove the oven from its packing, proceed as follows:
• Cut the straps (1) that tie up the carton.
• Open the carton (2), by removing the metallic clips.
• Remove the cardboard packaging (2).
• Check if everything is complete.
• Remove the fixed refractory cardboard and the loose
components.
• Check if the delivery is complying with the PACKING
LIST.
DANGER
The packing elements ( plastic bags, carton, nails,
etc...) shall be kept away from the reach of the chil-
dren, since they are potential danger sources, so,
they shall be gathered and sent to special centres
to correctly be recycled.
A message concerning possible damages, troubles
or a non-compliance in comparison with the
description in our packing list shall timely occur,
anyway it shall latest occur within 8 days from the
receipt of the oven. Otherwise, the goods will be
considered as accepted.
IMPORTANT
IMPORTANT
FIG. 3
GB - 13