General Warnings - OEM VOLTAIRE Manual De Uso Y Mantenimiento

VOLTAIRE
General specifications and warning
Chapter 1

1.1 - GENERAL WARNINGS

- Before starting the oven, user shall carefully read this
handbook and be aware of both technical specifications
and control elements.
- User should be trained in the use of the oven.
- Before installing the oven, make sure the area the latter shall
be placed in is compatible with oven overall dimensions and
weight.
- In case of installation or removal of oven parts, only means
of lifting & handling being suitable for both weight and geo-
metric characteristics of the part to be lifted/handled shall
be utilized.
- Only authorized as well as trained personnel may start,
adjust and/or repair the oven.
Concerning operations to be carried out on the oven, please
refer to this handbook.
- This device is not intended for use by persons (including
children) with reduced mental or motor skills, or lack of
experience and knowledge, unless there is a supervision or
instruction in the use of the device by a person responsible
for their safety.
Children should be supervised because they must not play
with the device.
- Mechanical and electric parts being inside the oven are
protected by panels which are totally closed by means of
screws.
- Before proceeding to the cleaning and / or maintenance of
the oven, and before removing any protection, make sure
the power supply and closing the gas tap are discon-
nected.
- Buyer's power supply system shall be equipped with an
automatic release system on the upper side of the oven
cutout switch and also with an earthing system complying
with all accident prevention protection requirements.
- The fuel system of gas must be provided with a partialization
valve located upstream of the oven
- In case of repairs to be done on the main switch or in the
main switch area, turn off the power of the electrical line.
- All service and maintenance operations that require the
removal of the security guards should only be performed
in specialized technical personnel and authorized.
- Make sure that all safety devices (barriers, protections,
carter, micro-switches, etc.) have not been tampered and are
perfectly working. On the contrary, they should be repaired.
- Do not remove the safety devices.
- In order to avoid personal risks, only suitable tools should
be used, in accordance with the local safety regulations.
- Do not tamper for any reason with the air, electric and gas
or any other mechanism.
- The oven shall not be left unguarded.
- Wear safety clothing only, approved by the law in force.
- In case of works to be done in a position that cannot be
reached from the ground, use safe ladders or lifting devices
only, in conformity with the local safety regulations.
- In case of repairs to be carried out near or under the oven,
make sure:
• there are no elements which can be started and/or there
are no unstable parts on or near the oven.
- To carry out operations on the oven, do not use your hands,
but only appropriate tools.
- Do not use your hands or other tools to stop any moving
parts.
- Do not use household matches, lighters or free flames near
the oven.
- TAKE HIGHEST CARE TO THE WARNING PLATES BE-
ING ON THE OVEN, WHEN YOU ARE GOING TO CARRY
OUT OPERATIONS ON OR NEAR IT.
- It is mandatory for the user to keep all the sign plates leg-
ible.
- Moreover the user is obliged to replace any warning plate
that, for any reason, has been damaged or is not clearly
legible. New warning plates can be obtained through our
Technical Service Centre.
- It is strictly forbidden to carry out repairs when the oven
is functioning.
- In case of malfunctioning of the oven or damaged oven
components, please contact the person in charge of main-
tenance, without carrying out arbitrary repairs.
- It is strictly forbidden to make an improper use of the
oven.
The oven shall always be used as provided for by good,
scrupulous technique rules, according to 2006/42 direc-
tion as well as workers' health & safety standards as per
legislation being in force in the oven utilization Countries or,
in the event the latter do not exist, according to 2009/142
direction.
GB - 3