Container Size - Ecolab EcoAdd Serie Instrucciones De Servicio

Control / software

7.10.13 Container size

The fill volume of the container is given under container size.
If a value is set here for pumps without Bluetooth PCB, a "Canister" (Fig. 70, pos. B) is
displayed on the operating screen instead of the empty signal symbol (Fig. 70, pos. A). A
calculated fill level is displayed here symbolically based on the last container change.
Fig. 70: Configuration: Container size
Factory setting: No setting
[Container size] - setting:
1. [Main menu] :
2. [Configuration menu] :
3. Use the scrollbar to scroll to the [Container size] menu option.
4. [Container size] - select.
ð Screen change for setting: [Container size]
5. Enter the quantity in litres (before the decimal point) using the scrollbar.
6. Select the quantity in millilitres after the decimal point.
7. Enter the millimetres with the scrollbar.
8. Press the
ð The setting is saved, and the screen switches back to the configuration overview.
9.
Pressing the
10. Pressing the
ð The canister symbol (Fig. 70, pos. B) is displayed as a new fill level symbol.
417102276 Rev. 3-01.2019
Ä Chapter 7.7 'Main menu' on page 67
Ä Chapter 7.10 'Overview - Configuration' on page 87
button.
button returns to the [Main menu].
button returns to the [Operating display].
112