Ecolab EcoAdd Serie Instrucciones De Servicio página 267

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 750
1.
[Open Main menu] :
2.
[Operating mode] - [Pulse] selection.
3.
[Next button]
Press.
ð Screen change for setting: 'Pulse interval' .
4.
Enter pulse interval (ml, l / pulse) of the flowmeter being used.
5.
Select the field for entering the value after the decimal point.
ð The colour changes to dark blue, which indicates that the field is ready for input.
6.
Set the decimal point with the scrollbar.
7.
Press the Next
ð The screen changes to the 'Pulse memory' prompt.
8.
Select whether the 'pulse memory' is to be used.
ð If you select the 'Pulse memory' , a
9.
Press the Next
ð Screen change to the setting for 'concentration' .
10. Enter solution concentration (% / ppm) of the flowmeter being used.
11. Select the field for entering the value after the decimal point.
ð The colour changes to dark blue, which indicates that the field is ready for input.
12. Set the decimal point with the scrollbar.
13. Press the
button.
ð Settings are saved, and the screen returns to the overview of the
[Operating mode] .
14. Press the
button.
ð The screen switches back to the overview of the [Main menu] .
15. Press the
button.
ð The screen switches back to the [operating display] .
16. Keep the displayed value (% / ppm) of the concentration pressed down for approx. 3
seconds.
ð The configuration page for converting the unit (% / ppm) is displayed.
17. Tap the required unit (% / ppm) of the concentration setting and select the required
unit.
18. Press the
button.
ð The screen switches back to the concentration setting.
19. If necessary, adjust the concentration value with the newly set unit.
20. Press the
button.
ð The screen switches back to the [operating display] and displays the newly set
unit.
Ä Chapter 7.7 'Main menu' on page 67
button.
button.
79
Control / software
appears in the selection box.
417102276 Rev. 3-01.2019
Tabla de contenido
loading

Tabla de contenido