Metering Monitoring - Ecolab EcoAdd Serie Instrucciones De Servicio

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 750

7.10.14.1.1 Metering monitoring

Fig. 72: Configuration: Metering monitoring
Factory setting: without metering monitor
Selection of the [Metering monitoring]:
1.
[Main menu] :
2.
[Configuration menu] :
3.
Use the scrollbar to scroll to the [Oval gear meter] menu option.
4.
[Oval gear meter] - select
ð Screen switches to the [Oval gear meter].
5.
[Metering monitoring] - select
ð Screen switches to the [Metering monitoring].
6.
If required, select the selection box 'with metering monitoring' .
ð The selection box 'with metering monitoring' is
7.
[Press the Next button]
ð Screen change for setting: 'Metering monitoring' / 'Stop pump' / 'Quantity' .
8.
If required, select the 'Stop pump' selection box.
ð The 'Stop pump' selection box is
9.
[ Press the Next button]
ð Screen change for setting: 'Metering monitoring' / 'Monitoring time' .
10. Enter the minutes before the decimal point with the scrollbar.
11. Select the seconds after the decimal point.
12. Enter the seconds with the scrollbar.
13. [ Press the Next button]
ð Screen change for setting: 'Metering monitoring' / 'Deviation' .
14. Enter the deviation in percent (%) using the scrollbar.
15. Press the
ð The setting is saved, and the screen switches back to the configuration overview.
16. Pressing the
17. Pressing the
Ä Chapter 7.7 'Main menu' on page 67
Ä Chapter 7.10 'Overview - Configuration' on page 87
.
.
.
button.
button returns to the [Main menu].
button returns to the [Operating display].
115
Control / software
marked.
marked.
417102276 Rev. 3-01.2019
Tabla de contenido
loading

Tabla de contenido