Operating Mode] [Timer] [Select Interval Programme] - Ecolab EcoAdd Serie Instrucciones De Servicio

Control / software

7.9.5.2 [Operating mode] [Timer] [Select interval programme]

Fig. 45: Operating mode: [Timer] [Select interval programme]
[Operating mode] - [Timer] [Select interval programme]- setting:
1. [Main menu] :
2. [Timer] [Select interval programme] - select.
3.
[Press the Next button]
ð Screen change to the selection of the timer interval (interval programme)
4. [Select interval programme] - select.
ð Screen change for setting: 'Interval programme' - 'Switch-on duration'
5. Use the scrollbar to set the time/hours.
6. select time / minutes.
7. Use the scrollbar to set the time/minutes.
8. Press the Next
ð Screen change for setting: 'Switch-off duration'
9. Use the scrollbar to set the minutes.
10. Select seconds.
11. Use the scrollbar to set the seconds.
12. Press the Next
ð Screen change for setting: 'start state'
13. If required, select 'Start condition OFF'
14. Press the Next
ð Screen change for setting: 'Capacity'
15. Set the litres with the scrollbar.
16. Select the ml range.
17. Set ml using the scrollbar.
18. Press the
ð Setting are saved, and the pump switches back to the 'operating mode' screen.
19. You can return to the 'main menu' by pressing the
20. Pressing the
417102276 Rev. 3-01.2019
Ä Chapter 7.7 'Main menu' on page 67
.
button.
button.
button.
button.
button returns to the [Operating display].
86
button.