Control / Software; General Information; Further Safety Settings - Ecolab EcoAdd Serie Instrucciones De Servicio

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 750
7

Control / software

Personnel:

General information:

– The controller / software described in this chapter relates exclusively to the
– The overviews shown of the menu levels only appear in the first setting
level.
– The following screens show example displays for a pump with a capacity of
11 l/h. The illustrations and information shown will differ for other pump
sizes.
7.1

Further safety settings

CAUTION!
When the pump is first started, NO ACCESS CODE is activated!
During the initial configuration of the pump, we strongly recommend enabling
the [access code] and only disclosing the set passwords to authorised
personnel:
To exclude the possibility of the pump being used improperly and / or of the
system parameters being adjusted inadvertently, the pump software must be
protected by the integrated multi-stage [access code] .
Setting the access code also protects the pump against unauthorised
access via a smartphone connected via Bluetooth. An unprotected pump
can be accessed via the EcoAPP without restriction!
If an access code has been defined on the pump, the pump will only be visible
in the EcoAPP once the correct access code for the pump has been entered in
the EcoAPP settings.
n
Production supervisor
n
Operator
'EcoAdd' -type pump.
Ä Chapter 7.10.4 'Access code' on page 92
To control and monitor the pump, it is possible to
use a smartphone and the Ecolab EcoAPP
(Android operating system from version 4.4.3 and
IOS (Apple) operating system from version 6) to
communicate with the pump.
These functions are not covered in any further
detail in this manual.
Further information can be found in the software
description of the EcoAPP (article no. 417102266)
57
Control / software
417102276 Rev. 3-01.2019
Tabla de contenido
loading

Tabla de contenido