Autostart - Ecolab EcoAdd Serie Instrucciones De Servicio

Control / software
7.10.6

Autostart

The function [Autostart option] determines whether the pump is set to "Pause" when the
mains connection is re-established following a power cut or if the pump should
immediately start running again in the set operating mode.
CAUTION!
The operator of the pump is responsible for avoiding the risk of an accidental
startup of the pump after the power is reconnected using suitable higher level
measures!
Fig. 54: Configuration: Autostart
Factory setting: without autostart
[Autostart option] - setting:
1. [Main menu] :
2. [Configuration menu] :
3. Use the scrollbar to scroll to the [Autostart option] menu option.
4. [Autostart option] - select
ð Screen switches to the [Autostart option].
5. If required, select the 'With Autostart' selection box.
ð A check mark is set in the selection field.
6. Press the
ð The setting is saved, and the screen switches back to the configuration overview.
7.
Pressing the
8. Pressing the
417102276 Rev. 3-01.2019
Ä Chapter 7.7 'Main menu' on page 67
Ä Chapter 7.10 'Overview - Configuration' on page 87
button.
button returns to the [Main menu].
button returns to the [Operating display].
96