Confirm The Pump Service - Ecolab EcoAdd Serie Instrucciones De Servicio

Operation
9.5

Confirm the pump service

Provided that an access code has been set in the pump, the pump servicing
can only be done with the access authorisation 'Administrator' !
Symbol Description of service displays
Service info with blue background: No servicing required
Service info with orange background: Advance notice of a servicing
Service info with a red background: Servicing overdue
Fig. 89: Confirm the pump service
1. In order to confirm a service, click the 'Service' shown on the screen.
2. This step can be skipped if there is no password query here.
ð The screen switches to the query for: 'Pump service' .
3. By pressing the Cancel button
again.
ð The service has not been reset, and the operation screen is displayed.
4.
By pressing the OK button
again, and the operation screen is displayed.
5. The operation screen now shows the new servicing time suitable to the material
pairing of the pump under (
417102276 Rev. 3-01.2019
In order to access the setting, press the 'Service' symbol and hold it in for
approximately 3 seconds.
If the [access code] is enabled
Ä Chapter 7.7 'Main menu' on page 67.
, the information screen that is displayed is closed
Ä Chapter 7.10.11 'Service interval' on page 106).
, please note the following:
, the information screen that is displayed is closed
136