Changing A Container - Empty Signal - Ecolab EcoPro Serie Instrucciones De Servicio

8.4

Changing a container - Empty signal

Chemical hazards (dosing medium/active substance)
DANGER!
Risk of injury to the skin and eyes caused by the chemical used
(dosing medium).
– Read the enclosed safety data sheet carefully before using the dosing
medium.
– The safety regulations and the prescribed protective clothing must be
complied with when working with chemicals.
– Attention must be paid to the information included on the product data
sheet of the dosing medium used.
DANGER!
It is essential that that hands are washed prior to work breaks and at the end of
the working day. Information about the usual precautions when handling
chemicals and about the use of PPE can be found on the relevant safety data
sheet for the chemical being used and must be complied with.
ENVIRONMENT!
Leaked, spilled dosing media can harm the environment.
Leaked, spilled dosing media must be cleaned and disposed of correctly,
according to the instructions on the product data sheet. It is essential to ensure
that the required personal protective equipment is used.
Preventive action:
– Place product containers in a tank to collect leaking fluids without harming
the environment.
WARNING!
Risk of slipping due to fluid in the operation and provisioning area!
– Wear non-slip, chemically resistant shoes when working.
– Place product containers in a tank to prevent a slipping hazard caused by
leaking fluids.
Performing a container change:
1. Remove the suction pipe from the empty container.
2. Replace the empty container with a full container.
3. Place the suction pipe back into the full container.
51
Operation
417102264 Rev. 5-01.2019