Operating Mode] [Pulse] - Concentration - Ecolab EcoAdd Serie Instrucciones De Servicio

Control / software

7.9.3.1 [Operating mode] [Pulse] - Concentration

The pulse interval (ml, l / pulse) for the flow meter being used and the concentration of the
dosage solution in % must be entered here first of all. It is then possible to select the
required active substance concentration in % or the dosage rate per pulse [l/Imp, ml/Imp,
G/Imp] on the operating level.
The pump software independently calculates the necessary metering stroke speed or
metering quantity from these parameters and sets the pump accordingly.
Fig. 39: Operating mode: Pulse
417102276 Rev. 3-01.2019 78