Ecolab EcoAdd Serie Instrucciones De Servicio página 273

Ä Chapter 7.7 'Main menu' on page 67
1. [Main menu] :
2. [Operating mode] - [Timer] - select.
3.
[Press the Next button]
ð Screen change to the selection of the timer interval (weekly programme)
4. [Seven-day programme] - select.
ð Screen change to the selection of the 'Time' - [Seven-day programme]
5. Select timing (up to seven different weekly programmes are possible)
ð The screen changes to the setting 'Timer 1' : 'Switching point'
6.
Press the button to close the weekly programme without saving.
ð The screen switches back to the [Operating mode] .
7. Use the scrollbar to set the time/hours.
8. select time / minutes.
9. Use the scrollbar to set the time/minutes.
10. Press the Next
ð Screen change for setting: 'Pulse duty factor'
11. Use the scrollbar to set the minutes.
12. Select seconds.
13. Use the scrollbar to set the seconds.
14. Press the Next
ð Screen change for setting: 'Capacity'
15. 'Set the decimal places of the capacity in litres' using the scroll bar.
16. Select the field for entering the value after the decimal point.
ð The colour changes to dark blue, which indicates that the field is ready for the
entry.
17. 'Set decimal places of the capacity in litres' using the scrollbar.
18. Press the Next
ð Screen change for setting: 'day of the week'
19. 'Select the days of the week'
ð A check mark is set in the selection field.
20. Press the
button.
ð The pump saves the settings and switches back to the previous screen.
21. Pressing the
button returns to the [Main menu].
22. Pressing the
button returns to the [Operating display].
.
button.
button.
button.
85
Control / software
417102276 Rev. 3-01.2019