Repair / Replacing The Control Unit; Remove Any Bluetooth Card Present; Create A Backup And Import Back Onto The New Control Unit Following Conversion - Ecolab EcoAdd Serie Instrucciones De Servicio

Conversion, upgrade, repair
13.3

Repair / replacing the control unit

13.3.1

Remove any Bluetooth card present

1. Unfasten cover screws (x 4) using a Torx wrench (TX25).
2. Remove the lid forwards.
3. Remove the Bluetooth card from the slot.
4. Fit the Bluetooth card into the new control unit.
13.3.2

Create a backup and import back onto the new control unit following conversion

See also chapter
1.
Press the Menu button
2. Insert the USB stick containing the configuration into the USB port on the pump.
3. In the [main menu] [select Configuration] .
4. [Select USB export] . ð An export file (*.PAR) is copied to the USB stick.
5. Press the
6. Remove the USB stick from the USB port.
7. Switch off the pump and disconnect from the mains.
8. Replace the control unit as described in
on page 165.
9. Import the configuration back to the new control unit.
417102276 Rev. 3-01.2019
Ä Chapter 7.14 'Import and export functions' on page 123
.
button.
168
Ä Chapter 13.1.1 'Rotating the control unit'