Select Batch] - [Initial Concentration] - Ecolab EcoAdd Serie Instrucciones De Servicio

7.10.12.3 [Select Batch] - [Initial concentration]

Fig. 69: Charge - [Initial preparation]
1. [Main menu] :
2. [Configuration menu] :
3. Use the scrollbar to scroll to the [Select Batch] menu option.
4. [Select Batch] - select.
ð Screen switches to the selection level [Select Batch]
5. 'Preparation concentration' .
ð The 'preparation concentration' option field is marked.
6.
[ Press the Next button]
ð Screen change for setting: 'Preparation concentration' / 'water quantity' .
7. Enter the quantity in litres using the scrollbar.
8. [ Press the Next button]
ð Screen change for setting: 'Preparation concentration' / 'concentration' .
9. Enter the concentration in percent (%) using the scrollbar.
10. 'Select the concentration in the decimal point position' .
11. Enter the concentration in percent (%) (after the decimal point) using the scrollbar.
12. [ Press the Next button]
ð Screen change for setting: 'Preparation concentration' / 'metering time' .
13. Enter the metering time in minutes using the scrollbar.
14. Press the
ð The setting is saved, and the screen switches back to the charge overview.
15. Press the
16. Pressing the
17. Pressing the
Ä Chapter 7.7 'Main menu' on page 67
Ä Chapter 7.10 'Overview - Configuration' on page 87
.
.
.
button.
button to return to the [Configuration menu].
button returns to the [Main menu].
button returns to the [Operating display].
111
Control / software
417102276 Rev. 3-01.2019