Display View During Ongoing Operation (Example) - Ecolab EcoAdd Serie Instrucciones De Servicio

7.4

Display view during ongoing operation (example)

Fig. 24: Operating indicator (example)
Pos. Designation
Pump name
1
Ä Chapter 7.10.1 'Pump name' on page 88
Maximum metering output in l/h (depending on the selected metering mode)
2
Ä Chapter 7.8 'Metering mode' on page 68
Metering mode (s, m, l, v)
3
Ä Chapter 7.8 'Metering mode' on page 68
Level display of the metering container
4
Ä Chapter 9.4 'Changing a container - Empty signal' on page 133
Maintenance display
5
Ä Chapter 9.5 'Confirm the pump service' on page 136
Display of the access code
6
code.
Variable status displays (OGM, calibration, batch, external enable, access code, Bluetooth, etc.)
7
Ä Chapter 7.4.1 'Symbols in operating mode' on page 64
Current, day, date and time
8
Ä Chapter 7.10.2 'Selecting the date/time' on page 89
9 Test button for manual metering and to bleed the system
Menu button for calling up the settings
10
Ä Chapter 7.7 'Main menu' on page 67
11 Start button in standby position ("ON" operating mode)
12 Display of the current percentage metering capacity
Current metering capacity
13
Ä Chapter 9.3 'Setting or changing the pump capacity in L' on page 132
Current operating mode
14
Ä Chapter 7.9 'Operating mode' on page 72
Metered chemical setting
15
Ä Chapter 7.10.10 'Dosing chemical' on page 102
The pump is operated via the Start button
If the pump is in operation, the background of the [Metering mode] (pos. 3) flashes, and
the Start button
/ and the elapsing timer for the short-term cancellation of an access
changes to the Pause button
63
Control / software
(pos. 11).
.
417102276 Rev. 3-01.2019