Metering Enable - Ecolab EcoAdd Serie Instrucciones De Servicio

7.10.7

Metering enable

With the metering enable function activated, the pump only runs when an external enable
contact is closed on terminal 20 and terminal 21 (see
installation' on page 50 and
enable' )' on page 73). The selected operating mode does not affect the use of the
metering enable function.
Fig. 55: Configuration: Metering enable
Factory setting: Without metering enable
[Metering enable] - setting:
1. [Main menu] :
2. [Configuration menu] :
3. Use the scrollbar to scroll to the [Metering enable] menu option.
4. [Metering enable] - select
ð Screen switches to the [Metering enable].
5. If required, select the 'With metering enable' selection box.
ð A check mark is set in the selection field.
6. Press the
ð The setting is saved, and the screen switches back to the configuration overview.
7.
Pressing the
8.
Pressing the
Ä Chapter 7.9.2 'Operating mode [Manual] (with 'metering
Ä Chapter 7.7 'Main menu' on page 67
Ä Chapter 7.10 'Overview - Configuration' on page 87
button.
button returns to the [Main menu].
button returns to the [Operating display].
97
Control / software
Ä Chapter 6.4 'Electrical
417102276 Rev. 3-01.2019